UV COLOR red – fluorescent tracer for detecting invisible leaks
The ultra-visible, non-destructive UV dye designed for waterproofing, drainage and building professionals.
A field-proven solution for a universal problem : the invisible leak
In construction, plumbing, or HVAC systems, invisible leaks are a recurring nightmare. They rarely appear where expected and often cause severe long-term damage:
- Slow but destructive infiltration beneath slabs or coatings
- Improper discharges in stormwater or wastewater systems
- Structural deterioration, unsanitary conditions, non-compliance, or even site shutdowns
Too often, valuable time is wasted breaking, patching, or guessing without certainty. UV COLOR Red ends this trial-and-error approach. It reveals water pathways in minutes under UV light — no demolition, no guesswork, and with exceptional visibility on any surface. It’s a technical tracer, built for real-world job sites, imperfect conditions, and professionals who need reliable, fast diagnostics.
Why choose a red UV tracer over a conventional dye ?
UV fluorescence provides targeted insight into water movement without altering the appearance of the environment. UV COLOR Red remains invisible to the naked eye — ideal for sensitive areas — and is only detectable under UV light, leaving no lasting stain. Specific advantages of red fluorescence :
- Maximum contrast on dark or wet surfaces (bitumen, wood, EPDM membranes, silicone joints)
- Excellent visibility under UV lamps, even low-power ones
- Easily photographed for documentation, inspection reports, or insurance purposes
Common applications of UV COLOR red
Used daily by hundreds of professionals — from construction engineers to public utilities — UV COLOR Red covers a wide range of diagnostic needs.
Building – waterproofing & finishing works
- Detect leaks under membranes (bituminous, PVC, EPDM)
- Locate water ingress through concrete slabs, screeds, or flat roofs
- Check waterproofing of upstands, corners, and service penetrations
- Identify leaks in bathrooms, shower trays, bathtubs, or surrounding walls
- Track moisture migration through floors or partition systems
Piping & sanitation networks
- Verify correct discharge in drainage systems (stormwater / wastewater segregation)
- Detect illegal or faulty cross-connections between networks
- Locate leaks in collectors, manholes, or junction boxes
- Track parasitic water or backflow points in complex systems
- Identify infiltration in underground or accessible networks
Used by municipalities to monitor water ingress during heavy rainfall and to locate unwanted inflows in combined sewer systems.
Industrial, laboratory, and sensitive environments
- Tightness testing of technical ducts, ventilation shafts, and embedded conduits
- Leak detection in closed hydraulic circuits (HVAC, cooling systems, glycol water)
- Fluid flow visualisation in experimental or prototype systems
- Educational demonstrations in technical schools, apprenticeships, and engineering labs
How to use UV COLOR red – step-by-step efficiency
- Dilute the tracer → Example: 30 mL in 1.5 L of water = 2% solution. Clear water preferred, but grey water possible.
- Apply the solution → Spray on target zones, allow gravity flow, or inject upstream depending on the system.
- Observe under UV → Use a portable 365 nm UV lamp. The dye becomes instantly visible at leak points.
- Rinse if necessary → A simple water rinse removes all traces. Safe for public buildings, kitchens, and sensitive facilities.
- Pro tip: For buried networks, check the outflow (drain, outlet, gully) to confirm tracer migration.
Technical specifications of UV COLOR red
- Product name: UV COLOR Red
- Type: Concentrated liquid fluorescent tracer
- Appearance in natural light: Colourless to slightly pink depending on dilution
- Fluorescence: Bright red under UV light (ideal 365–395 nm)
- Recommended dilution: 1–3% depending on visibility and surface area
- Material compatibility: Concrete, tiles, bitumen, PVC, PE, copper, stainless steel, EPDM, wood, glass
- Solution stability: >72 hours in neutral or low-load environments
- Visibility under UV: 10 minutes to several hours depending on surface and conditions
- Operating temperature: 0°C to 50°C
- Cleaning: Simple rinse with clear water – no permanent mark or residue
- Biodegradability: >90% (OECD 301F) – non-toxic formulation
- Density: approx. 1.05 g/cm³
- Standard packaging: 1L HDPE container with safety cap
- Shelf life: 24 months (room temperature, away from light and frost)
Order UV COLOR red – professional tracer for reliable, clean leak detection
✅ Field-tested professional product
✅ Unmatched performance-to-cost ratio
✅ Available immediately with fast delivery
Depending on your material and environment, you can also explore other shades from our UV dye range for multi-circuit leak tracing.
Order now at Fluotracking.com – fast delivery, secure payment, and expert advice from leak detection specialists.
